Measure where you make it

With the portability of FARO’s 3D measurement solutions, you can now measure your products where they are being made — right on the production line.

Every step you take, you can measure

Every step you take, you can measure

In the past, machine shop inspection has required the removal of parts from a CNC machine to a controlled inspection area for surface inspection or dimensional inspection of the part. This is time-consuming and expensive. Incorporating portable CMMs from FARO directly into production lines can streamline and speed up this process.

In-line, in-process and on-machine

In-line, in-process and on-machine

Each production step can be measured and documented by verifying tolerances and the quality of your product.

The portability of FARO’s 3D metrology tools, such as the measuring arm, enables efficient in-line, in-process and on-machine inspections. This delivers consistent, accurate measurements directly on or at the machine producing the parts.

Application Video: In-process Inspection

The portability of FARO’s 3D measurement solutions allows flexibility to inspect anywhere in the production process and delivers consistent, accurate and on-time information where it is needed.

+ Produce and measure
Every step you take, you can measure

Every step you take, you can measure

In the past, machine shop inspection has required the removal of parts from a CNC machine to a controlled inspection area for surface inspection or dimensional inspection of the part. This is time-consuming and expensive. Incorporating portable CMMs from FARO directly into production lines can streamline and speed up this process.

+ Check on the go
In-line, in-process and on-machine

In-line, in-process and on-machine

Each production step can be measured and documented by verifying tolerances and the quality of your product.

The portability of FARO’s 3D metrology tools, such as the measuring arm, enables efficient in-line, in-process and on-machine inspections. This delivers consistent, accurate measurements directly on or at the machine producing the parts.

+ Video

Application Video: In-process Inspection

The portability of FARO’s 3D measurement solutions allows flexibility to inspect anywhere in the production process and delivers consistent, accurate and on-time information where it is needed.

For all your Factory Metrology needs

FaroArm®

The Global Standard for Arm Technology

The FaroArm is an innovative portable coordinate measuring machine that allows manufacturers easy verification of product quality by performing 3D inspections, dimensional analysis, CAD comparison, tool certifications, and more. The Quantum line of FaroArms including the world’s only 8-Axis portable metrology arm solution, extends FARO’s tradition of maximum unsurpassed measurement accuracy, consistency and reliability in every working environment.

  • First measuring Arm to be certified against the new and rigorous ISO Standard 10360-12
  • 8-Axis FaroArm enables part to be rotated in real-time for unmatched measuring speed and user friendliness
  • Innovative design with excellent ergonomics and IEC tested for performance and reliability
  • FARO kinematic smart probes for quick probe replacement without the need to recalibrate

download_pdf

FARO Edge

FARO ScanArm®

FARO provides a competitive all-in-one metrology solution with the ScanArm

The FARO ScanArm combines all of the advantages of the Quantum line of FaroArms – including the world’s only 8-Axis portable metrology arm solution – with the FAROBlu or Prizm Color hand held laser scanner to deliver unparalleled non-contact measurement capabilities. Unlike other scanning systems, the ScanArm’s hard probe and the Laser Line Probe can digitize interchangeably without having to remove either component. Users can accurately measure prismatic features with the hard probe, then laser scan sections requiring larger volumes of data — all in one simple tool.

  • FAROBlu HD LLP laser technology delivers improved scanning results with higher speed and resolution
  • FAROBlu SD LLP delivers cost-effective standard resolution scanning solution
  • Prizm Color Lase Line Probe scans parts in color, and full, uncompromised measurement resolution
  • 8-Axis ScanArm offers comprehensive solution enabling part to be rotated in real-time to simplify measurement and scanning activities

download_pdf

FARO ScanArm

FARO Cobalt Array Imager

Unlimited Multi-Imager Scanning Configurations

The FARO Cobalt Array Imager is a metrology-grade non-contact scanner which captures millions of high-resolution 3D coordinate measurements in seconds. It is equipped with dedicated on-board processors and a smart sensor that allows multi-array configurations.

  • 5MP model – for most applications
  • 9MP model – improves resolution and the ability to capture features on edges and surfaces
  • Interchangeable lens with 250mm and 500mm field of view
  • Accuracy up to 0.027mm for 250mm lens and 0.050mm for 500mm lens

download_pdf

FARO Cobalt Array Imager

FARO Gage

Fast, easy and accurate portable CMM

The FARO Gage measuring arm is an accurate 3D gauge for small parts and is an industry leader in portable CMMs. It is inexpensive, offers high accuracy levels, improves measurement consistency, reduces inspection time and generates automatic reports.

  • 1.2m (4 ft.) spherical working volume – Ideal for small parts, molds and assemblies
  • Accuracy of 0.018mm (0.0007 in.)
  • Temperature & Overload Sensors – Notifications of thermal variations and improper handling
  • Universal 3.5” Quick Mount – Offers ‘mount-it-to-where-you-make-it’ convenience

download_pdf

FARO Gage

FARO Laser Tracker

Advanced, accurate, versatile and portable laser trackers

The FARO Vantage Laser Trackers are extremely accurate, large-scale portable coordinate measuring machines that enable you to build products, optimize processes, and deliver solutions by measuring quickly, simply and precisely. The VantageS6 and VantageE6 with the 6Probe are the industry’s most cost-effective 6DoF solutions offering complete, comprehensive, fully-featured, and easy-to-use 6 Degrees-of-Freedom (6DoF) Laser Tracker solutions that meet the dynamic measurement and accuracy requirements of the most challenging applications. FARO Laser Trackers set the standard in workflow productivity management for large-scale metrology applications by offering ease of use, exceptional portability, battery operation, ruggedness, and high accuracy.

  • VantageS & VantageS6 : 160m (525 ft) spherical working volume
  • VantageE & VantageE6 : 70m (230 ft) spherical working volume
  • ActiveSeekTM feature finds and follows target even when you pass behind obstructions
  • 6DoF via 6Probe enables measurement of hidden and hard-to-reach areas

download_pdf

FARO Laser Tracker Vantage
+ FaroArm

FaroArm®

The Global Standard for Arm Technology

The FaroArm is an innovative portable coordinate measuring machine that allows manufacturers easy verification of product quality by performing 3D inspections, dimensional analysis, CAD comparison, tool certifications, and more. The Quantum line of FaroArms including the world’s only 8-Axis portable metrology arm solution, extends FARO’s tradition of maximum unsurpassed measurement accuracy, consistency and reliability in every working environment.

  • First measuring Arm to be certified against the new and rigorous ISO Standard 10360-12
  • 8-Axis FaroArm enables part to be rotated in real-time for unmatched measuring speed and user friendliness
  • Innovative design with excellent ergonomics and IEC tested for performance and reliability
  • FARO kinematic smart probes for quick probe replacement without the need to recalibrate

download_pdf

FARO Edge
+ ScanArm

FARO ScanArm®

FARO provides a competitive all-in-one metrology solution with the ScanArm

The FARO ScanArm combines all of the advantages of the Quantum line of FaroArms – including the world’s only 8-Axis portable metrology arm solution – with the FAROBlu or Prizm Color hand held laser scanner to deliver unparalleled non-contact measurement capabilities. Unlike other scanning systems, the ScanArm’s hard probe and the Laser Line Probe can digitize interchangeably without having to remove either component. Users can accurately measure prismatic features with the hard probe, then laser scan sections requiring larger volumes of data — all in one simple tool.

  • FAROBlu HD LLP laser technology delivers improved scanning results with higher speed and resolution
  • FAROBlu SD LLP delivers cost-effective standard resolution scanning solution
  • Prizm Color Lase Line Probe scans parts in color, and full, uncompromised measurement resolution
  • 8-Axis ScanArm offers comprehensive solution enabling part to be rotated in real-time to simplify measurement and scanning activities

download_pdf

FARO ScanArm
+ Cobalt

FARO Cobalt Array Imager

Unlimited Multi-Imager Scanning Configurations

The FARO Cobalt Array Imager is a metrology-grade non-contact scanner which captures millions of high-resolution 3D coordinate measurements in seconds. It is equipped with dedicated on-board processors and a smart sensor that allows multi-array configurations.

  • 5MP model – for most applications
  • 9MP model – improves resolution and the ability to capture features on edges and surfaces
  • Interchangeable lens with 250mm and 500mm field of view
  • Accuracy up to 0.027mm for 250mm lens and 0.050mm for 500mm lens

download_pdf

FARO Cobalt Array Imager
+ Gage

FARO Gage

Fast, easy and accurate portable CMM

The FARO Gage measuring arm is an accurate 3D gauge for small parts and is an industry leader in portable CMMs. It is inexpensive, offers high accuracy levels, improves measurement consistency, reduces inspection time and generates automatic reports.

  • 1.2m (4 ft.) spherical working volume – Ideal for small parts, molds and assemblies
  • Accuracy of 0.018mm (0.0007 in.)
  • Temperature & Overload Sensors – Notifications of thermal variations and improper handling
  • Universal 3.5” Quick Mount – Offers ‘mount-it-to-where-you-make-it’ convenience

download_pdf

FARO Gage
+ Laser Tracker

FARO Laser Tracker

Advanced, accurate, versatile and portable laser trackers

The FARO Vantage Laser Trackers are extremely accurate, large-scale portable coordinate measuring machines that enable you to build products, optimize processes, and deliver solutions by measuring quickly, simply and precisely. The VantageS6 and VantageE6 with the 6Probe are the industry’s most cost-effective 6DoF solutions offering complete, comprehensive, fully-featured, and easy-to-use 6 Degrees-of-Freedom (6DoF) Laser Tracker solutions that meet the dynamic measurement and accuracy requirements of the most challenging applications. FARO Laser Trackers set the standard in workflow productivity management for large-scale metrology applications by offering ease of use, exceptional portability, battery operation, ruggedness, and high accuracy.

  • VantageS & VantageS6 : 160m (525 ft) spherical working volume
  • VantageE & VantageE6 : 70m (230 ft) spherical working volume
  • ActiveSeekTM feature finds and follows target even when you pass behind obstructions
  • 6DoF via 6Probe enables measurement of hidden and hard-to-reach areas

download_pdf

FARO Laser Tracker Vantage
FARO CAM2 Measure 10 Software

FARO CAM2 2018

Integrated Experience, Intuitive Workflow and Insightful Reporting

FARO CAM2 2018 is the world’s smartest 3D measurement platform and the only metrology software in the market that delivers on the strategic goals to always offer the best integrated FARO hardware experience, intuitive workflow and insightful reporting.

  • FARO Inside – optimized to support the FARO portfolio of metrology hardware solutions
  • Guided Workflows – simply and easily step through almost any measurement inspection routine
  • RPM (Repeat Part Management) Control Center – real-time information for actionable manufacturing insight
  • Remote Measurement – run commands, change scanning modes and see results in real-time

download_pdf

FARO CAM2 SmartInspect Software

FARO CAM2® SmartInspect

The first portable measurement software

FARO CAM2 SmartInspect is the perfect software for any FARO Laser Tracker, Arm and Gage users who are looking for non-CAD based inspection. It can run on Microsoft Windows™ based mobile devices, making it the first portable metrology software.

  • Live, On-Screen 3D View of Measurements – Live graphical view for interactive measurement
  • On-Screen Dimensioning – Users can interact directly with the graphical view
  • Touch-Capable Use – The software runs on Microsoft Windows™ based PCs or Touchpads
  • Mobile Device – Move the device during the measurement process and measure from different positions

download_pdf

BuildIT Software & Solutions

BuildIT Metrology

Increase your manufacturing efficiency

BuildIT delivers the industry’s leading 3D software solution for alignment, inspection and build applications in large-volume metrology as well as configurable in-process metrology.

  • Highly configurable and flexible – Streamline your workflows and processes
  • Advanced automation capabilities through user friendly interface with no coding required
  • Powerful GD&T Analysis capabilities for full model-based workflows
  • Hardware Agnostic Interface – Fully compatible with 3rd-party measurement devices
+ FARO CAM2 2018
FARO CAM2 Measure 10 Software

FARO CAM2 2018

Integrated Experience, Intuitive Workflow and Insightful Reporting

FARO CAM2 2018 is the world’s smartest 3D measurement platform and the only metrology software in the market that delivers on the strategic goals to always offer the best integrated FARO hardware experience, intuitive workflow and insightful reporting.

  • FARO Inside – optimized to support the FARO portfolio of metrology hardware solutions
  • Guided Workflows – simply and easily step through almost any measurement inspection routine
  • RPM (Repeat Part Management) Control Center – real-time information for actionable manufacturing insight
  • Remote Measurement – run commands, change scanning modes and see results in real-time

download_pdf

+ CAM2 SmartInspect
FARO CAM2 SmartInspect Software

FARO CAM2® SmartInspect

The first portable measurement software

FARO CAM2 SmartInspect is the perfect software for any FARO Laser Tracker, Arm and Gage users who are looking for non-CAD based inspection. It can run on Microsoft Windows™ based mobile devices, making it the first portable metrology software.

  • Live, On-Screen 3D View of Measurements – Live graphical view for interactive measurement
  • On-Screen Dimensioning – Users can interact directly with the graphical view
  • Touch-Capable Use – The software runs on Microsoft Windows™ based PCs or Touchpads
  • Mobile Device – Move the device during the measurement process and measure from different positions

download_pdf

+ BuildIT
BuildIT Software & Solutions

BuildIT Metrology

Increase your manufacturing efficiency

BuildIT delivers the industry’s leading 3D software solution for alignment, inspection and build applications in large-volume metrology as well as configurable in-process metrology.

  • Highly configurable and flexible – Streamline your workflows and processes
  • Advanced automation capabilities through user friendly interface with no coding required
  • Powerful GD&T Analysis capabilities for full model-based workflows
  • Hardware Agnostic Interface – Fully compatible with 3rd-party measurement devices