Calibrate machines for in-spec parts

FARO’s portable 3D measurement solutions like the FARO Laser Tracker and FaroArm can be used in the calibration of machines in manufacturing to ensure accuracy of parts produced by the machines.

Good parts and reduced downtime

Good parts and reduced downtime

Out-of-tolerance parts are often the result of a poorly calibrated machine. With properly calibrated machines, part production is optimized and downtime reduced. Properly calibrated machines produce conforming parts and allow you to minimize the costs of scrap and rework.

Short setup time to identify errors

Short setup time to identify errors

Quick checks of machine calibration using portable CMMs from FARO, allow operators to perform full volumetric accuracy tests with minimal setup time and to quickly identify calibration errors.

Industries such as automotive, aerospace and shipbuilding have adopted 3D portable metrology solutions from FARO for re-calibration of machines, tools, molds, dies, jigs and templates.

Application Video: Machine Calibration

FARO’s portable 3D measurement solutions allow quick, flexible and accurate calibration of machines in production which helps reduce downtime and ensures that part production is optimized and effective.

+ Calibrate to be accurate
Good parts and reduced downtime

Good parts and reduced downtime

Out-of-tolerance parts are often the result of a poorly calibrated machine. With properly calibrated machines, part production is optimized and downtime reduced. Properly calibrated machines produce conforming parts and allow you to minimize the costs of scrap and rework.

+ Quick and easy
Short setup time to identify errors

Short setup time to identify errors

Quick checks of machine calibration using portable CMMs from FARO, allow operators to perform full volumetric accuracy tests with minimal setup time and to quickly identify calibration errors.

Industries such as automotive, aerospace and shipbuilding have adopted 3D portable metrology solutions from FARO for re-calibration of machines, tools, molds, dies, jigs and templates.

+ Video

Application Video: Machine Calibration

FARO’s portable 3D measurement solutions allow quick, flexible and accurate calibration of machines in production which helps reduce downtime and ensures that part production is optimized and effective.

For all your Factory Metrology needs

FaroArm®

The Global Standard for Arm Technology

The FaroArm is an innovative portable coordinate measuring machine that allows manufacturers easy verification of product quality by performing 3D inspections, dimensional analysis, CAD comparison, tool certifications, and more. The Quantum line of FaroArms including the world’s only 8-Axis portable metrology arm solution, extends FARO’s tradition of maximum unsurpassed measurement accuracy, consistency and reliability in every working environment.

  • 8-Axis FaroArm enables part to be rotated in real-time for unmatched measuring speed and user friendliness
  • FARO kinematic smart probes for quick probe replacement without the need to recalibrate
  • Robust high-speed wireless operation

download_pdf

FARO Edge

FARO ScanArm®

The FARO ScanArm combines all of the advantages of the Quantum line of FaroArms – including the world’s only 8-Axis portable metrology arm solution – with the FAROBlu or Prizm Color hand held laser scanner to deliver unparalleled non-contact measurement capabilities. Unlike other scanning systems, the ScanArm’s hard probe and the Laser Line Probe can digitize interchangeably without having to remove either component. Users can accurately measure prismatic features with the hard probe, then laser scan sections requiring larger volumes of data — all in one simple tool.

  • FAROBlu HD LLP laser technology delivers improved scanning results with higher speed and resolution
  • FAROBlu SD LLP delivers cost-effective standard resolution scanning solution
  • Prizm Color Lase Line Probe scans parts in color, and full, uncompromised measurement resolution
  • 8-Axis ScanArm offers comprehensive solution enabling part to be rotated in real-time to simplify measurement and scanning activities

download_pdf

FARO ScanArm

FARO Cobalt Array Imager

Unlimited Multi-Imager Scanning Configurations

The FARO Cobalt Array Imager is a metrology-grade non-contact scanner which captures millions of high-resolution 3D coordinate measurements in seconds. It is equipped with dedicated on-board processors and a smart sensor that allows multi-array configurations.

  • 5MP model – for most applications
  • 9MP model – improves resolution and the ability to capture features on edges and surfaces
  • Interchangeable lens with 250mm and 500mm field of view
  • Accuracy up to 0.027mm for 250mm lens and 0.050mm for 500mm lens

download_pdf

FARO Cobalt Array Imager

FARO Laser Tracker

Advanced, accurate, and versatile laser trackers

The FARO VantageS and VantageE Laser Trackers are extremely accurate, large-scale portable coordinate measuring machines that enable you to build products, optimize processes, and deliver solutions by measuring quickly, simply and precisely. These Laser Trackers set the standard in workflow productivity management for large-scale metrology applications by offering ease of use, exceptional portability, battery operation, ruggedness, and high accuracy.

  • VantageS: 160m (525 ft.) spherical working volume
  • VantageE: 70m (230 ft.) spherical working volume
  • Accuracy up to 0.015mm (0.0006 in.)* [*Typical angle measurement performance at 2m]
  • ActiveSeek™ feature finds and follows target even when you pass behind obstructions

download_pdf

FARO Laser Tracker Vantage
+ FaroArm

FaroArm®

The Global Standard for Arm Technology

The FaroArm is an innovative portable coordinate measuring machine that allows manufacturers easy verification of product quality by performing 3D inspections, dimensional analysis, CAD comparison, tool certifications, and more. The Quantum line of FaroArms including the world’s only 8-Axis portable metrology arm solution, extends FARO’s tradition of maximum unsurpassed measurement accuracy, consistency and reliability in every working environment.

  • 8-Axis FaroArm enables part to be rotated in real-time for unmatched measuring speed and user friendliness
  • FARO kinematic smart probes for quick probe replacement without the need to recalibrate
  • Robust high-speed wireless operation

download_pdf

FARO Edge
+ ScanArm

FARO ScanArm®

The FARO ScanArm combines all of the advantages of the Quantum line of FaroArms – including the world’s only 8-Axis portable metrology arm solution – with the FAROBlu or Prizm Color hand held laser scanner to deliver unparalleled non-contact measurement capabilities. Unlike other scanning systems, the ScanArm’s hard probe and the Laser Line Probe can digitize interchangeably without having to remove either component. Users can accurately measure prismatic features with the hard probe, then laser scan sections requiring larger volumes of data — all in one simple tool.

  • FAROBlu HD LLP laser technology delivers improved scanning results with higher speed and resolution
  • FAROBlu SD LLP delivers cost-effective standard resolution scanning solution
  • Prizm Color Lase Line Probe scans parts in color, and full, uncompromised measurement resolution
  • 8-Axis ScanArm offers comprehensive solution enabling part to be rotated in real-time to simplify measurement and scanning activities

download_pdf

FARO ScanArm
+ Cobalt

FARO Cobalt Array Imager

Unlimited Multi-Imager Scanning Configurations

The FARO Cobalt Array Imager is a metrology-grade non-contact scanner which captures millions of high-resolution 3D coordinate measurements in seconds. It is equipped with dedicated on-board processors and a smart sensor that allows multi-array configurations.

  • 5MP model – for most applications
  • 9MP model – improves resolution and the ability to capture features on edges and surfaces
  • Interchangeable lens with 250mm and 500mm field of view
  • Accuracy up to 0.027mm for 250mm lens and 0.050mm for 500mm lens

download_pdf

FARO Cobalt Array Imager
+ Laser Tracker

FARO Laser Tracker

Advanced, accurate, and versatile laser trackers

The FARO VantageS and VantageE Laser Trackers are extremely accurate, large-scale portable coordinate measuring machines that enable you to build products, optimize processes, and deliver solutions by measuring quickly, simply and precisely. These Laser Trackers set the standard in workflow productivity management for large-scale metrology applications by offering ease of use, exceptional portability, battery operation, ruggedness, and high accuracy.

  • VantageS: 160m (525 ft.) spherical working volume
  • VantageE: 70m (230 ft.) spherical working volume
  • Accuracy up to 0.015mm (0.0006 in.)* [*Typical angle measurement performance at 2m]
  • ActiveSeek™ feature finds and follows target even when you pass behind obstructions

download_pdf

FARO Laser Tracker Vantage
FARO CAM2 Measure 10 Software

FARO CAM2® 2018

Integrated Experience, Intuitive Workflow and Insightful Reporting

FARO CAM2 2018 is the world’s smartest 3D measurement platform and the only metrology software in the market that delivers on the strategic goals to always offer the best integrated FARO hardware experience, intuitive workflow and insightful reporting.

  • FARO Inside – optimized to support the FARO portfolio of metrology hardware solutions
  • Guided Workflows – simply and easily step through almost any measurement inspection routine
  • RPM (Repeat Part Management) Control Center – real-time information for actionable manufacturing insight
  • Remote Measurement – run commands, change scanning modes and see results in real-time

download_pdf

FARO CAM2 SmartInspect Software

FARO CAM2® SmartInspect

The first portable measurement software

FARO CAM2 SmartInspect is the perfect software for any FARO Laser Tracker, Arm and Gage users who are looking for non-CAD based inspection. It can run on Microsoft Windows™ based mobile devices, making it the first portable metrology software.

  • Live, On-Screen 3D View of Measurements – Live graphical view for interactive measurement
  • On-Screen Dimensioning – Users can interact directly with the graphical view
  • Touch-Capable Use – The software runs on Microsoft Windows™ based PCs or Touchpads
  • Mobile Device – Move the device during the measurement process and measure from different positions

download_pdf

BuildIT Software & Solutions

BuildIT Software & Solutions

Your Product, Your Process, Your Solution

BuildIT delivers the industry’s leading 3D software solution for alignment, inspection and build applications in large-volume metrology as well as configurable in-process metrology.

  • Highly configurable and flexible – Streamline your workflows and processes
  • Advanced automation capabilities through user friendly interface with no coding required
  • Powerful GD&T Analysis capabilities for full model-based workflows
  • Hardware Agnostic Interface – Fully compatible with 3rd-party measurement devices

+ CAM2 2018
FARO CAM2 Measure 10 Software

FARO CAM2® 2018

Integrated Experience, Intuitive Workflow and Insightful Reporting

FARO CAM2 2018 is the world’s smartest 3D measurement platform and the only metrology software in the market that delivers on the strategic goals to always offer the best integrated FARO hardware experience, intuitive workflow and insightful reporting.

  • FARO Inside – optimized to support the FARO portfolio of metrology hardware solutions
  • Guided Workflows – simply and easily step through almost any measurement inspection routine
  • RPM (Repeat Part Management) Control Center – real-time information for actionable manufacturing insight
  • Remote Measurement – run commands, change scanning modes and see results in real-time

download_pdf

+ CAM2 SmartInspect
FARO CAM2 SmartInspect Software

FARO CAM2® SmartInspect

The first portable measurement software

FARO CAM2 SmartInspect is the perfect software for any FARO Laser Tracker, Arm and Gage users who are looking for non-CAD based inspection. It can run on Microsoft Windows™ based mobile devices, making it the first portable metrology software.

  • Live, On-Screen 3D View of Measurements – Live graphical view for interactive measurement
  • On-Screen Dimensioning – Users can interact directly with the graphical view
  • Touch-Capable Use – The software runs on Microsoft Windows™ based PCs or Touchpads
  • Mobile Device – Move the device during the measurement process and measure from different positions

download_pdf

+ BuildIT
BuildIT Software & Solutions

BuildIT Software & Solutions

Your Product, Your Process, Your Solution

BuildIT delivers the industry’s leading 3D software solution for alignment, inspection and build applications in large-volume metrology as well as configurable in-process metrology.

  • Highly configurable and flexible – Streamline your workflows and processes
  • Advanced automation capabilities through user friendly interface with no coding required
  • Powerful GD&T Analysis capabilities for full model-based workflows
  • Hardware Agnostic Interface – Fully compatible with 3rd-party measurement devices